1.6 0.8 terminal 1.2 cathode mark 0.8 0.36 0.65 ( 0.13 ) 0.8 0.8 0.85 0.8 ?1:duty1/5, 200hz / ?2:duty1/10, 1khzy?3:reference part no. chip structure emitting color absolute maximum ratings (ta 125?) electrical and optical characteristics (ta 125?) power dissipation p d (mw) forward current i f (ma) peak forward current i fp (ma) reverse voltage v r (v) operating temperature topr( ?) storage temperature tstg( ?) forward voltage v f reverse current i r dominant wavelength d luminous intensity i v typ. (v) i f (ma) max. (a) v r (v) min.* 3 (nm) typ. (nm) max.* 3 (nm) i f (ma) min. ( mcd) ty p. (mcd) i f (ma) sml-e12v8w aigainp on gaas red 54 20 100* 2 5 -40 to +85 -40 to +100 2.2 20 10 4 625 630 635 20 16 40 20 sml-e12uw 62 25 60* 1 4 -30 to +85 -40 to +85 2.1 619 624 629 36 100 sml-e12u8w 54 20 100* 2 5 -40 to +85 -40 to +100 2.2 615 620 625 25 63 sml-e12dw orange 62 25 60* 1 4 -30 to +85 -40 to +85 1.9 603.5 606.5 609.5 56 200 sml-e12d8w 54 20 100* 2 5 -40 to +85 -40 to +100 2.2 602 605 608 40 100 sml-e12y8w yellow 587 590 593 25 63 sml-e12m8w yellowish gree n 569 572 575 10 25 sml-e12p8w green 557 560 563 2.5 6.3 smle13ec8t ingan bluish green 68 3.0 5 5 520 527 535 5 56 120 5 SMLE12EC6T -30 to +85 36 85 smle13bc8t blue 66 -40 to +85 2.9 465 470 475 14 40 smle12bc7t -30 to +85 464 476 9 22 color type v u d y m p e b sml-e1 series features ~ exceled tm series ~ compact, thin size (1.60.8mm, t=0.36mm) ~ led die consists of 4 elements ~ original device technology enables high brightness and high reliability 1608(0603) 1.60.8mm(t=0.36mm) relative intensity(%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 angular displacement ( deg ) x - y x' - y' relative intensity(%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 scanning angle(deg) relative intensity (%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 angular displacement ( deg ) x - y relative intensity (%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 scanning angle ( deg ) x - y sml-e12 series / sml-e12 8 series smle12 series / smle13 series tolerance : ?0.1 (unit : mm) sml-e 12 8 series sml-e 12 series directivity (deg) relative intensity (%) directivity (deg) relative intensity (%) directivity (deg) relative intensity (%) directivity (deg) relative intensity (%) (unit : mm) specifications dimensions recommended solder pattern viewing angle ? exceled tm is rohm's pending tradmark. smle 12 ec 6 t/bc 7 t smle 13 bc 8 t 1/3 ? 2012 rohm co., ltd. all rights reserved. www. r ohm.com 2012.12 - rev.c data sheet
forward current : i f (ma) forward voltage : v f (v) 100 10 2.5 1.0 2.0 1.5 3.0 1 ta=25c sml-e 12 v 8 w sml-e 12 u 8 w sml-e 12 d 8 w sml-e 12 y 8 w sml-e 12 m 8 w sml-e 12 p 8 w relative luminous intensity forward current : i f (ma) 0 5 10 15 20 0 0.2 0.4 0.6 0.8 1.0 1.2 ta=25c sml-e 12 v 8 w sml-e 12 u 8 w sml-e 12 d 8 w sml-e 12 p 8 w sml-e 12 y 8 w sml-e 12 m 8 w maximum forward current : (ma) ambient temperature : ta (c) 30 20 10 -40 -20 0 20 40 60 80 100 0 relative luminous intensity atmosphere temperature : ta (c) 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 1.6 i f =20ma sml-e 12 v 8 w sml-e 12 u 8 w sml-e 12 d 8 w sml-e 12 y 8 w sml-e 12 m 8 w sml-e 12 p 8 w sml-e 12 v 8 w sml-e 12 u 8 w sml-e 12 d 8 w sml-e 12 y 8 w sml-e 12 m 8 w sml-e 12 p 8 w sml-e 12 uw sml-e 12 dw maximum forward current : (ma) ambient temperature : ta (c) 30 20 10 -40 -20 0 20 40 60 80 100 0 sml-e 12 uw sml-e 12 dw relative luminous intensity atmosphere temperature : ta ( c) 1.4 1.2 1 0.8 0.4 0.6 0.2 -40 -20 0 20 40 60 80 100 1.6 i f =20ma sml-e 12 uw sml-e 12 dw 100 10 1 forward current : i f (ma) forward voltage : v f (v) 2.0 1.2 1.4 1.6 1.8 2.2 2.4 2.6 ta=25c sml-e 12 uw sml-e 12 dw forward current-forward voltage electrical characteristics curves luminous intensity-atmosphere temperature luminous intensity-forward current derating sml-e1 series 100 10 1 forward current : i f (ma) forward voltage : v f (v) 3.0 3.2 2.8 3.4 ta=25c 2.6 relative luminous intensity atmosphere temperature : ta ( c) 1.4 1.2 1 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 1.6 i f =5ma relative luminous intensity (a.u.) forward current : i f (ma) ta=25c 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 5 10 15 20 maximum forward current : i f (ma) atmosphere temperature : ta(c) 0 20 40 60 80 100 0 10 20 30 smle 12 ec 6 t smle 12 bc 7 t smle 13 ec 8 t smle 13 bc 8 t smle 12 ec 6 t smle 13 ec 8 t smle 12 bc 7 t smle 13 bc 8 t smle 12 ec 6 t smle 13 ec 8 t smle 12 bc 7 t smle 13 bc 8 t smle 12 ec 6 t smle 12 bc 7 t smle 13 ec 8 t smle 13 bc 8 t relative luminous intensity forward current : i f (ma) ta=25c 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 iel ativritt umntosyftwdcyt:((tm)a=d2tm525m5cy www. r ohm.com y/1yz1ytct5o.z0
sml-e1 series package size(mm) luminous intensity (mcd) height(mm) g h j k l m n p q r s t u v w x 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 mini-mold chip leds 1608 0.36 sml-e12v8w sml-e12u8w sml-e12uw t rank reference of brightness red (v, u) (ta=25?c, i f 120ma) orange (d) (ta=25?c, i f 120ma) package size(mm) luminous intensity (mcd) height(mm) g h j k l m n p q r s t u v w x 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 mini-mold chip leds 1608 0.36 sml-e12dw t sml-e12d8w yellow (y) (ta=25?c, i f 120ma) package size(mm) luminous intensity (mcd) height(mm) g h j k l m n p q r s t u v w x 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 mini-mold chip leds 1608 0.36 sml-e12y8w green (m, p) (ta=25?c, i f 120ma) package size(mm) luminous intensity (mcd) height(mm) f g h j k l m n p q r s t u v w x 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1800 mini-mold chip leds 1608 0.36 sml-e12p8w sml-e12m8w blue (b) (ta=25?c, i f 15ma) t measurement tolerance ? 10%. part no. explanation packing specification rohm led products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. please contact the nearest sales office o r distributer if necessary. s m l e 1 2 m t p t 8 6 special code will be applied for emitting color b/e series. series name package name element type emitting color resin color taping specifications v u 2 3 high brightness type d y m p b t type transparent colorless w milkywhite red:630nm red:620nm orange:605nm yellow:587(590)nm yellowish-green:572nm green:560nm e bluish-green:527nm blue:470nm t86 t87 cathode at sprocket hole side reverse of t86 ? ? will be taken out for emitting color b/e series. ? concerning the brightness rank ? please refer to the rank chart above for luminous intensity classification. ? part name is individual for each rank. ? when shipped as sample, the part name will be a representative part name. general products are free of ranks. please contact sales if rank appointment is needed. rank sign (brightness rank) ? package size (mm) luminous intensity (mcd ) height(mm) k l m n p q r s t u v w x y z 3.6 to 5.6 5.6 to 9.0 9 to 14 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 900 to 1400 1400 to 2200 2200 to 3600 mini-mold chip leds 1608 0.36 smle12bc7t smle13bc8t bluish-green (e) package size(mm) luminous intensity (mcd) height(mm) k l m n p q r s t u v w x y z 3.6 to 5.6 5.6 to 9.0 9.0 to 14 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 900 to 1400 1400 to 2200 2200 to 3600 mini-mold chip leds 1608 0.36 SMLE12EC6T smle13ec8t (ta=25?c, i f 15ma) 3/3 ? 2012 rohm co., ltd. all rights reserved. www. r ohm.com 2012.12 - rev.c
r1102 a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)
|
